2008 – 2014 Collective Bargaining Agreement
Between
THE BUILDING CONTRACTORS ASSOCIATION
PREAMBLE
And
LOCAL #46 METALLIC LATHERS UNION
And REINFORCING IRONWORKERS of
NEW YORK AND VICINITY of the
INTERNATIONAL ASSOCIATION of
BRIDGE, STRUCTURAL, ORNAMENTAL
And REINFORCING IRON WORKERS
Hereinafter referred to as the “Union”
MO 0
MVocheA
ao\a-
<3oit
WHERAS, the Employer and the LInion on February’ 20, 1918, entered into an agreement setting forth the conditions
of employment, rates of pay, and hours of work to be observed between the parties; and
WHEREAS, said agreement has continued uninterruptedly, subject to amendatory changes from time to time with
respect to rates of pay and hours on employment; and
WHEREAS, the parties now desire to again supplement and amend the agreement of February 20, 191 8, with respect,
among other things, to rates of pay for the period commencing July 1, 2008 and terminating June 30, 2014.
Now, therefore, in consideration of the foregoing, it is mutually agreed as follows:
Page 2
ARTICLE I
TERRITORY COVERED
This Agreement shall apply on all buildings and construction work and all work within its terms in all of the Boroughs
of New York City, Nassau and Suffolk Counties, Long Island, New York, Westchester County, New York and the
Southern Section of Rockland County, New York.
ARTICLE II
RECOGNITION AND UNION SECURITY
1 . The Employer recognizes the Union as the sole and exclusive bargaining representative for all Lathers in its
employ, including Foremen, Journeymen, Apprentices and Trainees.
2. All employees covered by this agreement who are not members in good standing of the Union shall be
required to become and remain members in good standing of the Union, as a condition of continued
employment, on or after the seventh day following the effective date of this agreement, whichever is later. All
employees who are members of the Union shall be required to remain members in good standing as a
condition of continued employment. If the Union elects not to accept any individual into membership in the
Union and elects not to require the payment from such individual of the Union’s uniform initiation fee and
periodic dues, such individual shall be required to pay the Union a Uniform and periodic service fee
representing the individual’s share of the cost of the Union’s operation of the Hiring Hall. If any individual
fails to comply with the Union security requirements of this Article, such individual shall be discharged by the
Employer after the Employer is advised of such failure by the Union, by formal written notification.
3. This shall be a guaranteed contract; it shall be lived up to by all parties.
4. If the Employer engages in any class of work not embodied in Building and Construction work, both parties
shall comply with all Union conditions then existing in that class of work.
ARTICLE III
WORKED COVERED
The Employer agrees that the work set forth in this Article III falls within the Union’s exclusive jurisdiction and is
covered by this Agreement. The Employer further agrees that the work described in all the paragraphs of this
Article III shall be contracted for the Employer and shall be assigned to and performed by Journeymen Lathers
represented by the Union. The Employer further agrees that the performance of the work defined and referred to
in this Article III by Journeymen Lathers shall be a term and condition of employment under this Collective
Bargaining Agreement.
All reinforcing and post-tension hardware and cables shall be handled and installed by Lathers covered by this
Agreement. This shall include all work and material specified by PTI (Post Tension Institute) for the proper
installation of all post tension systems. Any reinforcing related material or devices used in conjunction with any
phase of reinforcing concrete shall be exclusively handled and installed by Lathers covered by this Collective
Page 3
Bargaining Agreement. In addition, all brushing, painting or any job site preparations of the concrete reinforcing
and all splicing and coupling devices shall be done by Lathers covered by this Agreement.
This Agreement shall apply on the laying and setting of iron and steel mesh used in fireproof construction, on the
cutting and bending of all iron and steel and metal and wire lath or mesh, or sheets for floor arches, and on making
of hangers, clips and stirrups; on the fabrication and assembling of all columns, beams and girders of metal or wire
lath, iron or steel; on the cutting, bending and setting of all iron and steel and of metal or wire lath or mesh used in
construction of reinforced concrete; on cad welding in all phases such as preheating and grinding or rebars, field
pre-stressing and field post tensioning in all its systems and phases. The foregoing provision shall also apply to
fiberglass or any other material, when used in the reinforcement of concrete in conjunction with, or in place of any
of the aforesaid mentioned materials. When frames of reinforcing steel, iron or metal lath, or wire lath, or mesh,
are made and assembled at the shop by heating processes that cannot be made on the job, the same shall be
handled after arriving at the building solely by Journeymen Lathers. Journeymen Lathers shall make the final and
flush cut on all systems except G-lock.
The Employer and Union agree to form a committee empowered to make and implement a joint action plan for
dealing with precast concrete.
In addition, the following work shall be under the jurisdiction of Local 46:
1. The cutting assembly, installation and or erection by any and all methods, of all metal furring,
framing, bracketing, studding, etc. connected with the construction or installation of the following
types of work:
Metal Lath and Plaster Ceilings
Gypsum Lath and Plaster Ceilings
All Iron, Furring and Gypsum Lath construction
Acoustic Ceilings and Iron Furring in connection with same
Molded Cornice Work
False and Furred Beams
Wall, Plaster or Column Furring
Steel Fireproofing
Hangers and Inserts for all Ceilings
Setting Frames to Receive Recessed Lights
And any and all other types of work involving the use of metal framing and all furring of any and all types, for
attaching and/or applying a plastic or precast material, or a base thereof. All isolators or insulation material in
connection with all types of furring and lathing, or any materials that take the place of same.
The installation of any and all work in the erection of veneer plaster ceiling systems, soffits and fascias. This work
will include the metal track, any or all studding, inserts, hangers and carriers, or furring channels which receive boards
or lath and is covered by any type of veneer plaster regardless of how plaster substance is applied.
2. The attaching, installation, and/or erection, by any and all methods of all metal lath or mesh, gypsum
lath, plaster board, or any type of base to which plastic or precast material is to be applied or attached.
3. The assembly, attaching, installation, and/or erection by any and all methods, of all metal beads,
screeds, grounds, moldings, plaster stop and casing beads, corner guards, partition ends, casings, base,
or any other metal specialty of any description intended to establish a finished line for a plastic
material.
Page 4
4. The assembly, attaching., installation, and/or erection by any and all methods of any and all work
incidental to, or directly related to the contents of the foregoing subdivisions 1, 2, and 3 of this article.
The foregoing includes the work of unloading, carrying, hoisting materials and building scaffolds on
the job sites.
5. The cutting, bending, fabrication, installation, construction and erection of all hangers and carriers
(purlins) used in the construction of all ceiling system, suspended or not, including all acoustical and
drywall fascias and soffits.
6. The fabrication and installation of all the components in the assembly, erection and construction of
wire lath walls, ceilings and partitions.
7. The fabrication and installation of all of the components involved in the assembly, erection and
construction of rock lath walls and ceilings.
8. The fabrication and installation of all of the components involved in the assembly, erection and
construction of all veneer coat fascias, soffits and ceilings.
9. The fabrication and installation of all of the components involved in the assembly, erection and
construction of all suspended ceilings.
10. The installation of any and all types of isolators used in conjunction with any type of ceiling system.
11. Frames of reinforcing steel, or units made of iron, metal lath, wire lath or mesh, which have been
made and assembled before arriving at the job, shall be handled after arrival at the job solely by
employees covered by this Agreement.
12. Each employee covered by this Agreement shall posses all the tools necessary for the proper
performance of the work which he is called upon to do, excepting machines, cutters, punchers, vises,
lasers, water levels, hard hats, reels and belts.
13. The Union agrees that there shall be no restrictions of the use of machinery, tools, appliances or
methods. Foremen, Journeymen and Apprentices shall operate and maintain all machinery, tools and
appliances used by them in their work; including, but not limited to, diameter discs, cutting blades,
punches and air and gas valves and welding equipment.
14. Compensation for the theft of tools must be submitted to and settled by the Trade Board provided for
in this Agreement.
15. It is agreed that shanties, or lockers, will be provided at the job site so that employees may change
their clothes and store clothes and tools. The shanties shall be provided with heat and electric light.
16. The Employer agrees that it will endeavor to purchase accessories from shops that employ Lathers,
providing it is competitive with market prices of other suppliers.
17. The Employer agrees to endeavor to purchase reinforcing steel from a supplier that has a current
Collective Bargaining Agreement with Local 46.
18. The Employer agrees that the Employee shall not be required to set up any time keeping device except
during the normal working day.
Page 5
The Employer agrees that all of the above referenced work is work falling within the traditional jurisdiction of
employees represented by the Union and such work will be assigned to and performed by Journeymen Lathers
represented by the Union.
The Employer further agrees that the work set forth hereinafter is covered by this Agreement, and that such work shall
be contracted for by the Employer and assigned to and performed by Journeymen Lathers and that such contracting,
and such assignment shall be a term and condition of employment under this Agreement.
ARTICLE IV
STANDARD WORKDAY
(1) The workday shall be seven (7) hours, to wit; from eight (8:00) am to twelve (12:00) noon, and from twelve¬
thirty (12:30) pm to three-thirty (3:30) pm. The normal working days shall be Monday to Friday, inclusive.
(2) Flextime: An Employer may start all of his Lathers at either (7:00) am or eight (8:00) am and work a seven (7)
hour day and they shall be paid seven (7) hours at the straight time rate. Lunch shall be one half (1/2) hour and
shall be taken no later than five (5) hours from the start of work. The Employer must notify the Union two (2)
days prior to the start of flextime and it shall be for five (5) consecutive days for a total of seven (7) days.
(3) Shift Work: Two (2) or three (3) shift jobs. Each shift shall be eight (8) hours with one half (/2) hour for lunch
included and Lathers shall receive the straight time rate plus twelve dollars ($12.00) per hour; fringe benefits to
be paid at the straight time rate. All hours worked after eight (8) hours shall be paid at time and one-half (l-!4)
for wages, fringes and differential. All hours on Saturday shall be paid at the time and one-half rate (I-/2) for
wages, fringes and differential. When a shift is worked during a Holiday or on a Sunday, or worked more than
ten (10) hours, the wage, fringe and differential shall be paid at double time (2x)
(4) Off-Hour Start: Shall commence after 3:30 pm and shall conclude by 7:00 am. The first seven (7) hours shall
be at the straight time with a differential of twelve dollars ($12.00) per hour in the envelope. All hours after
seven (7) hours for an off-hour start shall be paid at the time and one-half (I-/2) rate for wages, fringes and
differential. When a shift is worked on a Saturday it shall be paid at the rate of time and one-half (l-‘A) for
wages, fringes and differential. When a shift is worked during a Holiday or on Sunday or worked more than ten
(10) hours, the wage, fringe and differential shall be paid at double time (2x).
(5) (a) If a job is shut down through no fault of the concrete contractor by a duly authorized public governing body,
the Lathers working on the site shall be paid on the following schedule:
Off hour shut down: 2 hours pay. (Lathers must stay on the jobsite)
Morning shut down: 4 hours pay. (Lathers must stay on the jobsite)
Afternoon shut down: Full days pay. (Must be delivered to the jobsite the next morning)
Al) paychecks shall be brought to the jobsite during these working hours.
(b) If there are jobsite noise restraints established by a duly authorized public governing body that mandates a
7:30 am job start, the workday shall begin at 7:30 am.
Page 6
ARTICLE V
WAGES AND FRINGE BENEFITS
(1) Wages: The following increases in wage rates or fringe benefits will be effective for Foremen and Journeymen
on the following dates with the understanding that the Union shall have the right to allocate to fringe benefit
contributions any portion of the amount set forth below on the dates set forth below. Any amount so allocated
by the Union to fringe benefit contributions shall not be considered to be wage increases due to employees and
shall not be considered to be a reduction in wages. Provided, however, that the right of allocation shall be that of
the Union and any determination by the Union that an amount shall be allocated to fringe benefit contributions
shall not constitute said amount as any wage increase. The amount so allocated shall not be considered wages
and shall not be considered as part of the income of employees. The Union shall also have the right to determine
that any portion of such wage increase may be used to increase the amount of the dues check off. It shall be
noted that ERISA requires the Trustees to allocate or re-allocate monies to Funds when they ascertain that a
particular Fund or Funds are deficient or under funded.
| Effective July 1, 2008 Effective July 1, 2009 Effective July 1, 2010 Effective July 1, 2011 Effective July 1, 2012 Effective July 1, 2013 |
$3.10 per hour to be allocated by the Local 46 membership $3.20 per hour to be allocated by the Local 46 membership $3.30 per hour to be allocated by the Local 46 membership $3.45 per hour to be allocated by the Local 46 membership $3.45 per hour to be allocated by the Local 46 membership $3.45 per hour to be allocated by the Local 46 membership |
The taxable wage rate for Apprentices during their first (1st) year of training shall be paid at the rate of $27.90 per
hour. Apprentices in their second (2nd) year of training shall be paid at the taxable rate of $33.23 per hour.
Apprentices in their third (3rd) year of training are to be paid at the taxable rate of $37.02 per hour. Such rates shall
become effective during the first (lsl) year of Apprenticeship and at the beginning of an individual’s second (2nd) and
third (3rd) years of Apprenticeship.
The Apprenticeship rates are a percentage of the Journeymen’s rate and shall reflect changes in the Journeymen’s
wages and fringes. Apprentices shall participate in Metal Lathers Annuity Fund at rates which shall be supplied by the
Trust Fund.
Everything is time and one half (l-‘A) on overtime. The exception shall be Sunday, all Legal Holidays and after ten
(10) consecutive hours worked when double time (2x) on everything shall be paid. All overtime past ten (10) hours
worked in a day shall be paid at double time (2x) wages and double (2x) fringe benefits.
For increases for Apprentices in the periods effective July 1, 2008 thru July 1, 2013 the increase in wages and annuity
for each year apprentice classification shall be in the same proportion to the July 1, 2008 comparative amounts
proportional to the increases in wages and annuity for Journeymen.
Apprentice ratios shall constitute 1 out of 4 Journeymen on the jobsite, in accordance with the appropriate provisions
of the Ironworkers International Constitute.
Page 7
EMPLOYER TRUST FUNDS
CONTRIBUTIONS FOR APPRENTICES
JULY 1, 2008 to JUNE 30, 2014
Increases for Apprentices in the periods effective July 1, 2008 thru July 1, 2014, to Employer Trust Funds Fringe
Benefits shall be the same as for Journeymen. Apprentices will have one (1) week at the Local 46 Educational Center
for each six (6) months worked. They shall be paid from the Local 46 Joint Apprentice Fund.
The parties agree that the Joint Apprentice Committee shall provide training to Journeymen Lathers and Apprentices in
the classification of Detailing. When the Journeymen Lathers become competent in this classification the Employer
may hire all such detailers from the Union’s Hiring Hall in accordance with the terms of this Agreement.
The Employer agrees that, pursuant to written authorization from an Apprentice Lather, it will check off from the
wages of Apprentice Lathers union dues in an amount uniformly determined by the Union. Such amounts will be
transmitted in accordance with the usual practice.
The Union will teach in its Apprentice School the need for hard hats and a safe work environment.
Commencing July 1, 1987 every Employer covered by this Agreement shall contribute one cent ($.01) per hour for
every hour worked by the Employees to “The New York Plan for Construction Industry” (NYPCI). Each Employer
shall be bound by all the terms and conditions of the Agreement and Declaration Trust establishing the NYPCI and by
all the By-Laws adopted to regulate said Fund. Commencing July 1, 2002 every Employer covered by this Agreement
shall contribute one cent ($.01) per hour for every hour worked by the Employees to the Building Trades Employers
Association Promotion Fund (BTEAPF). Each Employer shall be bound by all the terms and conditions of the
Agreement and Declaration Trust establishing the BTEAPF and by all the By-Laws adopted to regulate said Fund.
The Trustees of said Funds shall secure the approval of the Treasury Department under the applicable provision of the
Internal Revenue Code and shall amend the same, if necessary, to secure such approval so as to qualify the Employer
contributions as deductions for federal income tax purposes. All Employer contributions to the NYPCI and the
BTEAPF shall be remitted monthly to the office of the Metallic Lathers Trust Fund. The office of the Metallic Lathers
Trust Fund shall deliver all such contributions to the NYPCI and the BTEAPF respectively verifying the amount of
each such contribution has been correctly computed by the Employer. The office of the Metallic Lathers Trust Fund
shall advise the Union and the Trustees of the NYPCI and the BTEAPF respectively whenever an Employer shall be in
default in the payment of contributions due the NYPCI and the BTEAPF respectively under this Agreement.
The Labor Management Cooperative Trust (LMCT) shall pursue the promotion of our industries and all other
activities, which will grow our industry and help us to combat the non-union.
Commencing July 1, 2002 all Employers covered by this Agreement shall contribute twenty ($.20) cents for each hour
worked by or paid to Lathers to the Cement League Industry and Advancement Promotion Fund (CLIAAPF) and Evo
cents ($.02) for each hour worked by or paid to Lathers to the New York Concrete Construction Institute, both at 49
West 45th Street, New York, NY 10036. All Employer contributions to CLIAAPF and the New York Concrete
Construction Institute shall be remitted to the office of the Metal Lathers Local 46 Trust Fund. The Fund shall provide
the Employer with payroll reporting forms for such purpose. The office of the Fund shall deliver all such contributions
to CLIAAPF and the New York Concrete Construction Institute after verifying that such amount of each such
contribution has been correctly computed by the Employer. CLIAAPF and the New York Concrete Construction
Institute shall reimburse the Metal Lathers Local 46 Trust Fund for all expenses incurred in receiving, recording,
auditing, etc. in connection with the receipt and transmittal of these contributions.
Page 8
(1) All fringe benefit contributions to the Funds shall be at the time and one-half (l-‘/z) rate of overtime except
Sunday and all Legal Holidays when double time (2x) on everything shall be paid. All hours past ten (10) hours
worked in a day shall be paid at double time (2x) wages and double time (2x) time fringe benefits.
(2) A Local 46 foreman shall man every job. It is agreed that a single Journeyman Lather can be employed for
preliminary work, in which case he shall be paid foreman’s wages, which shall be $3.00 per hour above the
Journeyman’s rate. All foremen shall receive $3.00 per hour above the Journeymen’s rate. In order for the
foreman to receive the straight payroll week’s salary, he must be employed from his hiring for three (3)
consecutive payroll weeks before qualifying for the straight payroll weeks salary; but from the first day, he shall
be paid holidays and for inclement weather days. Such preliminary employment, however, shall not restrict the
Employer’s rights to bring in another foreman at a later date.
If the Employer requests that his employees work on Saturday or a Holiday and due to inclement weather conditions
they are unable to work, the foreman shall be paid time and one-half (l-‘A) for all wages and fringes for Saturday and
double (2x) time for all wages and fringes for Sundays and Holidays.
The Union shall have the right to designate a Shop Steward on each job.
(3) The Employer shall have the right to pay employees by check, provided that checks shall be delivered to
employees no later than two (2) days after the end of the work week, as defined hereafter, and provided further
that the Employer has complied with the bonding provisions of this Agreement. Any charges up to $8.00 per
check, with the receipt to be presented to the Employer, will be accepted for reimbursement to the Employee.
If an Employer issues a check to an employee and the check is returned for insufficient funds or negligence on the part
of the Employer, exclusive of bank error, a penalty of fourteen (14) hours wages and fringes shall be imposed.
If for any reason the Employer terminates the services of any employee working under this Agreement, the accrued
wages including benefits of the employee shall be paid to him before the end of the work day. Otherwise, waiting time
shall be charged for accrued wages and fringes. If any employee shall of his own volition leave the service of his
Employer, then his Employer may retain his wages and benefits until the next regular pay day.
Unless delay is caused by conditions beyond the control of the Employer, if men are not paid as specified above, they
shall be paid waiting time, not to exceed fourteen (14) hours wages and fringes. The Employer agrees that lay-off
checks shall be on the job site before the end of the working day. Otherwise, waiting time shall apply at the
appropriate overtime rate.
(4) The work week shall begin at 8:00 am on each Wednesday and end at the close of the work day on the following
Tuesday. If an Employer elects to pay Employees by check, Employees shall receive their checks on the
Thursday following the close of the work week. If Thursday is a holiday, Employees shall receive their checks
on Wednesday. If an Employer elects to pay Employees in cash, that Employer shall have a work week
beginning at 8:00 am on Thursday and ending at the close of the work day on the following Wednesday.
Employees on such work week shall be paid in cash on Friday. If Friday is a holiday, Employees shall be paid in
cash on Thursday.
(5) The Employer agrees that all fringe benefits, including, but not limited to, contributions to the Metal Lathers
Local 46 Trust Fund, Metal Lathers Local 46 Pension Fund, and all other Funds, shall be paid on pay day at the
job site by check payable to the Metal Lathers Local 46 Funds and such payment must be accompanied by the
properly filled out reporting forms required by the Trust Fund. The present system for Employer contributions
to the Vacation Fund and the Annuity shall be continued in effect. If a check payment to any of the benefit
funds herein is returned because of insufficient monies, the Trustees of the affected funds shall have the right to
require subsequent payment to the affected funds by certified check for the remainder of the job.
Page 9
(6) The Employer shall be required to mark plainly all pay envelopes with the Employee’s name and number, the
number of hours he has worked, his Social Security number, all deductions made from his wages for Social
Security, taxes or any other legitimate or proper purpose, and the net amount of employee’s pay. The Employer
shall be required to post in the shanty on the job site the insurance company or other carrier which is responsible
for its workmen’s compensation coverage. The Employer shall not make any deductions from the wages of
Employees for or on account of New York State Disability Insurance unless Local 46 utilizes the New York
State Disability Fund in conjunction with the Local 46 Trust Fund Disability Benefit.
ARTICLE VI
OVERTIME RATES
All overtime shall be paid a time and one-half (l-‘/z) for overtime wages and fringes except Sunday when double time
(2x) on everything shall be paid. All overtime after ten (10) hours worked in a day shall be paid at double time (2x)
wages and double time (2x) fringes.
In the event that a man shall be transferred from his regular job at 2:30 pm or 3:30 pm to another Employer’s job sites,
to which he reports as soon is reasonably possible, and proceeds to work he shall be deemed to have been continuously
employed during that time and shall receive the overtime rate thereof.
ARTICLE VII
LEGAL HOLIDAYS
The term “Legal Holidays” where used in this Agreement, shall mean:
New Year’s Day- (Federally recognized date)
President’s Day
Good Friday
Memorial Day
Fourth of July (Federally recognized date)
Labor Day
Columbus Day
Election Day (in Presidential year only)
Thanksgiving Day
Christmas Day – (New York State recognized date)
Page 10
Work on Christmas Eve and New Year’s Eve will terminate at 11:00 am or 12:00 noon in accordance with the
designated starring time, but the men will be paid for the full day. If the men are required to work after 11:00 a.m. or
12:00 noon respectively, they will be paid at double time (2x) for all wages and fringes for every hour thereafter
worked. If Employee’s do not show for work they will not receive any pay for the said day. If an Employee reports to
work on Christmas Eve or New Year’s Eve and cannot start for any reason including inclement weather he shall
receive three (3) hours pay at the straight time. If Christmas Eve or New Year’s Eve falls on a Saturday or Sunday,
men will work on Friday until 11:00 am or 12:00 noon in accordance with the designated starting time and receive a
full day’s pay.
ARTICLE VIII
MANNING OF JOBS
Whenever the Employer notifies the Union that employment vacancies exist and requests the Union to furnish
workmen, the Union agrees that within forty-eight (48) hours from said requests, such workmen shall be furnished in
the manner set forth:
(1) The Union shall establish and maintain an open employment list for the employment of competent workmen in
accordance with the Rules and Procedures for Operation of Hiring Hall dated August 17, 1971 and presently in
effect and all referrals shall be made pursuant to said Rules and Procedures.
(2) The Employer shall retain the absolute and unconditional right, with just cause, to reject any workman referred
by the Union.
(3) The cost and expense of establishing and maintaining the open list and of the referrals therefrom shall be borne
by all of the registrants. In the case of registrants who are not members of the Union their share of such costs
and expenses shall not exceed a sum equal to the pro rata share of the cost and expense of operating the
employment list and the referrals therefrom which is being borne by members of the Union by the payment of
Union dues. Within seven (7) days from the date of this Agreement or of the date of registry on the list,
whichever is later, the Union may require that registrants incur the obligation of making monthly payments of
their share of such cost and expenses. Failure of a registrant to make payment to such costs and expenses shall
constitute grounds for removal from such list and shall nullify any prior referral therefrom.
(4) The Hiring Hall shall be the exclusive source of workmen and no hiring shall be done at the job site
ARTIVLE IX
WORKING CONDITIONS
There shall be a Working Shop Steward on each job. Said Steward shall be the first man employed on the job
subsequent to tiie foreman and shall be appointed by the Business Agent from amongst any qualified member in the
Union, whether or not he is employed by that particular company. The Working Shop Steward will man all concrete
pours which cover reinforcing steel or any other material as described in Article III of this Agreement.
When one or more Journeymen Lathers are requested by the Employer by 8:00 a.m. by telephone and fax to report to
work on the following day, such Journeymen Lather or Lathers referred by the Union shall report to work the
following day at the prescribed starting time, either 7:00 a.m. or 8:00 a.m.
Page 11
The Employer shall notify the Union when a job is started and any transfer of any Employees covered by this
Collective Bargaining Agreement.
The use of safety equipment by the Employees is mandatory and the failure to use such equipment and appliances shall
be grounds for immediate dismissal.
A Lather Foreman shall man every job. It is agreed that a single Journeyman Lather can be employed for preliminary
work, in which case he shall be paid Foreman’s wages. Such preliminary employment, however, does not establish
Foremanship nor shall it restrict the Employer’s right to appoint as Foreman any Local 46 Lather subsequently
employed.
It is agreed that the Union and the Employer will work together to deal with the issue of competitiveness and unfair
competition in the Building and Construction Industry. When the parties believe it necessary, the Union and the
Employer will have the ability to modify this Agreement in order to permit the Union to protect its jurisdiction and in
order to enable the Employer to secure more work.
The cutting of all reinforcing steel rods under %” in thickness, only when same are 6 feet or over in length, may be
done at the mill, if desired by the Employer. No Pre-fabricated Reinforcing mats greater than 3/s” in diameter (also
known as bar mats) shall be permitted on the jobsite, nor shall they be used to replace traditional reinforcing materials.
All cutting and bending of steel shall be done on the job site.
Any product, which replaces reinforcing steel in concrete, shall be the exclusive work of Local 46.
Employees shall provide themselves with a suitable kit of tools necessary for the proper carrying on of the work.
However, the Employer shall provide gloves and aprons for Employees on bench or machine work and the Employer
shall supply hard hats, reels and belts. There shall be no restrictions on the use of any machinery, tools, appliances or
methods.
Neither party during the life of this Agreement is to adopt any by-law or to attempt to enforce any working rule or
regulations, which is contrary to any of the clauses in this Agreement. Neither shall either party attempt to enforce any
working rules, which have not been approved by this Joint Trade Board.
No person representing the Union, except its Business Representatives shall have the right to interview the workmen
during business hours. The Business Representatives shall comply with all general conditions of the job regarding
passes, entrances to be used, etc.
The Journeymen shall have the privilege of working for whomever they see fit, according to terms of this Agreement.
The Employers are at liberty to employ or discharge whomever they see fit according to the terms of this Agreement.
The Business Agents of the Union shall have access to the work at all times and be responsible for the actions of the
Union.
The Union or its representatives shall not order a strike or stoppage of work, nor shall the Employees strike against any
Employer, or collectively leave the work of an Employer, nor shall any Employer lock out Employees prior to filing a
complaint, or pending the adjustment of any existing disputes. The only exception shall be caused by the failure of the
Employer to comply with Article XII, No. 5.
The foregoing does not deny the right of the Union to render assistance to other labor organizations by removing its
members from jobs, when combined action by all trades is officially ordered, but no removal shall take place until
formal notice is first given to the Secretary of the Trade Association involved.
Page 12
Lathers will operate all machines and equipment used by them in performance of their work. They will replace all
diameter discs, cutting blades and punches used in the performance of their duties and they shall operate and/or set air
and gas valves used in the performance of their duties.
There shall be three (3) men on the bending machine. Upon the request of the Employer, the Business Manager and
Business Agent of Local 46 will meet to discuss the possibility of more or less than 3 Lathers on the Bending Machine.
It must be demonstrated that safety will not be compromised. The request of the Employer may not be unreasonably
withheld.
All welding of any items pertaining to reinforced concrete shall be performed exclusively by Lathers on the job site.
The handling of such materials and equipment that is provided by the Employer shall be the exclusive work of Lathers
covered by this Collective Bargaining Agreement. The welding machine shall be considered a tool of the trade and it
shall be handled exclusively by Lathers on the job site.
Cell phones shall only be used in the case of an emergency.
No alcohol or illegal drugs shall be permitted on the job.
No Journeymen Lather or Apprentice shall be penalized in any way for engaging in picketing or other Union concerted
activity to which he is directed by the Union.
ATICLE X
TRADE BOARD
A Trade Board will be established consisting of three (3) members of the Association and three (3) members of the
Union. Within two (2) weeks after the signing of this Agreement, each of the parties hereto shall appoint or elect its
representatives on the Trade Board. These representatives shall hold office until their successors are appointed or
elected.
No member of the Association, and no Employer, shall participate as a
member of the Trade Board, or as a representative of the Association on
the Trade Board, unless such Employer is a signatory to a Collective
Bargaining Agreement with the Union or, unless by written assent, said
Employer has agreed to be bound by the Union’s Collective Bargaining
Agreement with the Association.
The function of the Trade Board shall be the enforcement of this Agreement. It shall interpret the provisions and shall
adjust all disputes arising here under, regardless of the sources of the complaints. Its decisions shall be final and
binding on the parties hereto.
In every case, complaints and charges shall be presented to the Trade Board in writing.
The Trade Board shall meet upon the call of its Chairman or Secretary.
At all meetings of said Trade Board both sides shall have equal number of votes on all questions, whether all their
members are present or not. Upon request by any directly interest party, said Trade Board shall meet within twentyfour (24) hours after a complaint or charge and shall render a decision as promptly as consistent with the
circumstances.
Page 13
Any Employer members of the Trade Board directly involved in any case shall withdraw from the Board until the case
is settled and an alternate shall be selected by the remaining Employer members to fill the said temporary vacancy.
Any Union member of the Trade Board directly involved in any case shall withdraw from the Board until the case is
settled, and an alternate shall be selected by the remaining Union members to fill the said temporary vacancy.
In the event of the failure of the Trade Board to reach a decision upon any complaint or charge brought before it, the
matter shall be submitted to an impartial arbitrator to be mutually agreed upon by the parties.
A Secretary appointed by the Board from among its members shall keep an accurate record of all proceedings of said
Trade Board and a copy of it shall be furnished to each of the parties hereto.
Each party hereto shall pay one-half (/2) the expense of the said Trade Board. It is mutually agreed that there shall be
no cessation of any work in connection with which there may be a complaint or charge, but that all such work shall
regularly proceed pending the decision of the Trade Board or Executive of the Building Trades Employer’s
Association.
Any penalties, which may result from the findings or decisions of the Trade Board, are to be fixed and imposed by the
Association or the Union, as the case may be, to which the member affected may belong.
ARTICLE XI
JURISDICTIONAL DISPUTES
Disputes between trades and disputes relative to questions of jurisdiction of trades shall be adjusted in accordance with
the principles of the New York Plan for the Settlement of Jurisdictional Disputes as set forth in the Joint Arbitration
Plan of the New York Building Trades and as adopted on July 9, 1903 and amended on April 22, 1905 and, as
thereafter amended, and all decisions rendered thereunder determining disputes arising out of the conflicting
jurisdictional claims of various trades shall be recognized by and be binding upon the parties hereto, except to the
extend that Section 3 of the said Joint Arbitration Plan requires the Employer to employ only members of the Union
directly, through subcontractors or otherwise.
Pending the determination of any dispute under the New York Plan for the Settlement of Jurisdictional Disputes as
stated in the preceding paragraph, the members of the Union shall remain at work on the project without change in
status.
ARTICLE XII
WELFARE AND PENSIONS FUNDS,
VACATION, ANNUITY and SCHOLARSHIP FUNDS,
NEW YORK LATHERS APPRENTICESHIP and
PROMOTION FUNDS
(1) (a) Employers shall contribute to the Metal Lathers Local 46 Trust Fund established by the Agreement and
Declaration of Trust entered into as of the 2nd day of May, 1946 at the stipulated hourly rate provided by
the Trust Fund.
Page 14
(b) Employees shall contribute to the Metal Lathers Local 46 Pension Fund established by the Agreement
and Declaration of Trust entered into as of the 30th of June, 1950, at the stipulated hourly rate provided
by the Trust Fund.
(c) Employers shall contribute to the New York Lathers Apprenticeship Fund at the stipulated hourly rate
provided by the Trust Fund.
(d) Employers shall contribute to the Metal Lathers Local 46 Vacation Fund established by the Agreement
and Declaration of Trust entered into as of the 1st day of January, 1961 at the stipulated hourly rate
provided by the Trust Fund.
(e) Employers shall contribute to the Metal Lathers Local 46 Annuity Fund Established by the Agreement
and Declaration of Trust entered into as of the 1st day of January, 1961 at the stipulated hourly rates
provided by the Trust Fund.
| (f) | Employers shall contribute to the Metal Lathers Local 46 Scholarship Fund to be established at the hourly rate provided by the Trust Fund. |
(g) Employers shall contribute to the Metal Lathers Local 46 LMCT established by this Agreement and
declaration of Trust entered into as of 7/1/02 at the stipulated hourly rate provided by the Trust Fund.
(h) Employers shall be bound by all of the provisions of said Agreements and Declarations of Trust creating
said Funds, as the same may be written or amended by the parties thereto.
(2) All contributions to the said Funds referred to above shall be paid by the Employer for every’ hour worked or
paid for all employees covered by this Collective Bargaining Agreement, provided however, that time and one-half (1-
/2) contributions will be required for hours which time and one-half (I-/2) is paid and double time (2x) contributions
will be required for the hours which double time (2x) is paid.
(3) The Employer agrees that all contributions to all Funds referred to herein shall be paid on payday at the job
site by check payable to the Metal Lathers Local 46 Funds, which check shall be accompanied by the required
reporting forms. The present system for Vacation and Annuity Fund contributions will be continued in effect.
(4) Every Employer covered by this Agreement shall provide a Surety Bond to guarantee payment of
contributions to all Local 46 Funds. A Bond of Fifty thousand dollars ($50,000.00) for wages and benefits must be
posted and maintained by all signatories to this Agreement. If an Employer does not post such a Bond, the Union shall
have the right to engage in an economic strike against the Employer or to refuse to send Journeymen Lathers to that
Employer’s jobs. The Employer recognizes the Union as the exclusive majority representative to all employees
covered by the Agreement in the bargaining unit, set forth therein, pursuant to Section 9(a) of the Labor Management
Relations Act. Any Employer who is delinquent in paying his fringe benefits contributions shall pay twelve percent
(12%) on all late payments per annum.
(5) Whenever an Employer is in default to the Local 46 funds, the Union may remove Employees covered by this
Agreement from the work of such Employer. If such men who are removed remain at the job site during regular
working hours, they shall be paid for lost time not to exceed three (3) days pay.
(6) In addition to providing coverage for those persons employed as Lathers under the provisions of this
Agreement, the Metal Lathers Local 46 Trust Fund and Metal Lathers Local 46 Pension Fund covers those Officers,
Business Agents and Employees of the Union for whose benefit the Union pays Employer contributions in the said
amounts as are contributed by Employers on the wage of Employees working a full work week.
Page 15
(7) If an Employer fails to send in weekly reports or sends in incorrect reports to the Metal Lathers Local 46 Trust
Fund, the Union shall have the right to have an accountant, designated by the Union, conduct a full and complete
examination of the Employer’s payroll books and records, and the Employer shall bear the full cost of any fees or
charges of such accountant.
(8) The Employer agrees that, by the execution of this Collective Bargaining Agreement, it has agreed to abide by,
be bound by and contribute to the Agreements and Declarations of Trust establishing the Metal Lathers Local 46 Trust
Fund and Dental Fund, the Metal Lathers Local 46 Pension Fund, the New York Lathers Apprenticeship Fund, the
Metal Lathers Local 46 Annuity Fund, the Metal Lathers Local 46 Scholarship Fund, the Labor Management
Cooperative Trust, the Vacation Fund Trust, the New York Concrete Construction Institute, CLIAAPF, NYPCI and
BTEAPF Funds, as such Agreements and Declarations of Trust may now exist or may be hereafter amended. The
Employer also agrees to accept and approve the designation of Employer Trustees by the various Employers and
Associations and to be bound by the actions of said Employer Trustees as designated in said Agreements and
Declarations of Trust and their successors, as if the Employer had originally consented to the appointment of such
Trustee.
The Employer also agrees to make the contributions referred to in this Agreement to all of the Funds and/or Trusts and
to make said contributions in accordance with the Agreements and Declarations of Trust for each of the Trusts and/or
Funds, together with such interest and penalties as may be provided for in said Agreements and Declarations of Trust if
payments are delinquent. The Employer also agrees to the rules and regulations adopted by the Trustees of each of the
Funds and further agrees to recognize and abide by the right of the Trustees of each of the Funds to audit the books and
records of the Employer to ascertain that the Employer’s contributions are being properly made to all of the said
Funds. The Employer agrees to pay the costs of such audit and all expenses involved therewith.
( 9) The Union and Employer agree that the payment of all benefits shall be by one check for each job site made
payable to the order of the Metal Lathers Local 46 Funds.
The Employer recognizes that when the payment of fringe benefit contributions to Metal Lathers Local 46 Funds, or
remittance of Union membership supplemental dues check-off to the Union, pursuant to the Agreement is made by
check or other negotiable instrument which is returned uncollected, Metal Lathers Local 46 Funds and/or the Union
incur additional cost and expense. The Employer hereby agrees that in the event any payment to the said Funds, or to
the Union, by check or other negotiable instrument, results in the check or negotiable instrument being returned
without payment after being duly presented, the Employer shall be liable for additional damages in the amount of Five
hundred dollars ($500.00) to cover such additional costs, charges and expenses. Nothing herein is intended, nor shall
be interpreted, to mean that the Metal Lathers Local 46 Funds, or Union, waive any other remedies including, but not
limited to any liquidated damages required to be paid pursuant to this Agreement, in the event Employer contributions
are not paid in full at the time required.
(10) Each Employer shall promptly furnish to the Trustees of the Metal Lathers Local 46 Funds on demand, any
and all wage records relating to all Lathers and all Foremen employed by each of the Employers in the territorial
jurisdiction of Local 46. Besides such wage records, each Employer shall also provide to the Trustees, together with
the payment of such contributions or, at such other intervals as the Trustees may request, written reports as to the
wages paid to, and work records of, said Lathers, other payroll data, such as social security, unemployment insurance
and compensation insurance records as well as any and all other data pertaining thereto and the contributions due or
payable to the Funds as the Trustees of the Funds may now or hereafter require.
The books and records of the Employer shall be made available at all reasonable times for inspection and audit by, but
not limited to, the accountants, independent auditors or other representatives of the Trustees of the Metal Lathers Local
46 Funds. In addition, the books, records, information and documentation of any subsidiary, or “alter ego” when
performing work under the jurisdiction of Local 46 or joint venture of the Employer shall also be made available, at all
reasonable times, for inspection and audit by, but not limited to, the accountants, independent auditors or other
Page 16
representatives of the Metal Lathers Local 46 Funds. The Employer shall retain, for a minimum period of six (6)
years, all records necessary for the conduct of a proper audit in order that a designated representative of the Trustees
may make periodic review to confirm that contributions owed pursuant to this agreement are paid in full. If after the
Trustees have made a reasonable request, the Employer fails to produce the documentation necessary for a proper
audit, the Trustees, in their sole discretion, may determine that the Employer’s monthly hours subject to contributions
for each month of the requested audit period are the highest number of employee hours during the last twelve (12)
months for which reports were filed. Such determination by the Trustees shall constitute presumptive evidence of
delinquency. Before making such determination, the Trustees shall give seven (7) days written notice to the Employer.
Nothing herein shall mean that the Funds relinquish their right to commence legal proceedings to compel an
examination of the Employer’s books and records for audit.
When auditors are sent to audit the books and records of an Employer, and an appointment time is scheduled, and not
cancelled or rescheduled in a timely manner and the auditor cannot start at the appointed time and date and must
return, through no fault of his own, the Employer shall be penalized and pay to the Metal Lathers Local 46 Funds the
sum of five hundred dollars ($500.00) per auditor.
Any Employer who is delinquent in paying its weekly contributions to the Metal Lathers Local 46 Funds shall pay
interest of twelve percent (12%) per annum on all late payments or such amount of interest as the U.S. Department of
Labor or the Internal Revenue Service may permit Trustees of employee benefit funds to collect for late payment of
contributions, whichever amount is greater.
If any of the Employers does not fully and duly report or timely pay all amounts due as contributions to any or all of
the Funds in accordance with the above provisions, in any arbitration as provided herein, or in any action under the
Multi-Employer Plan Amendments Act of 1980 (hereinafter “Title”) by a fiduciary for or on behalf of any or all of the
Funds to enforce payment of contributions or to enforce Section 306 of the Title in which a judgment in favor of any or
all of the Funds is awarded, the arbitrator or the Court shall award the Fund(s):
a) the unpaid contributions;
b) interest at the rate of twelve percent (12%) on the unpaid contributions;
c) an amount equal or greater ofi) interest on the unpaid contributions, or
ii) liquidated damages provided for under the plan in an amount not in excess of twenty percent
(20%)
d) reasonable attorney’s fees and costs of the action, to be paid by the respondent or defendant; and
e) such other legal or equitable relief as the arbitrator or the court deems appropriate.
(11) No Employee Leasing: Employee Leasing is prohibited. To confirm this, when an Employer signs with the
Union, the contractor’s name (accompanied by a copy of the corporate papers verifying name) as agreed and fixed on
the Association or Independent Collective Bargaining Agreement must be the same and only name that appears on the
employees’ weekly payroll check. It must be the same and only name that appears on the weekly fringe benefit check
to the Metal Lathers Local 46 Funds and the same and only name that appears as the “insured” on the workers
compensation policy (accompanied by a copy of the workers compensation policy verifying name) with the “certificate
holder” being the trade employed. Any deviation from the above would make this agreement void and nullify the
current and future employment of Local 46 members as stated under this Collective Bargaining Agreement.
Page 17
If the Local 46 Membership adopts a Member Selective Benefit Plan (MSBP), it shall become part of this Collective
Bargaining Agreement.
ARTICLE XIII
DURATION OF AGREEMENT
(1) This Agreement is to be effective from July 1, 2008 to June 30, 2014. Written notice of a desire to terminate
or modify this Agreement must be given to the other party one hundred twenty (120) days prior to June 30,
2014, or any subsequent date, for six (6) year periods thereafter.
(2) This Agreement may not be amended, altered or modified, except by an instrument in writing signed by both
parties hereto. It is further agreed that neither party during the life of this Agreement, will adopt or attempt to
enforce any By-Laws, Working Rules or Regulations, which is contrary to any of the terms of this Agreement,
unless the same has been agreed upon and approved by an instrument in writing signed by both parties herein.
(3) Successor clause: This Collective Bargaining Agreement shall be an absolute part of the assets of the
Signatory and any successor shall be bound by its covenants. If the Employer merges or consolidates with
another Employer or purchases, acquires, sells, leases or otherwise transfers its business operations to another
Employer, the Employer agrees that it will guarantee that the Successor will be bound by all the terms and
provisions of this Collective Bargaining Agreement and the Employer shall assume responsibility for the
continuation of the Collective Bargaining Agreement between this Union and any Successor.
(4) The rules and regulations of Local 46’s Hiring Hall shall be considered as part of this CBA.
(5) If a party to this Agreement employs a sub-contractor, the sub-contractor must also be a signatory to this
Agreement. If, a party to this Agreement employs a sub-contractor, the sub-contractor shall be bound by all
provisions of this Agreement.
(6) The employer must not subcontract bargaining unit work unless the sub-contractor receiving the subcontract
has an agreement with the Union. In the event that the subcontractor is delinquent in the payment of
contributions to the Metal Lathers Local 46 Benefit Funds, then the Metal Lathers Local 46 Fringe Benefit
Funds shall give written notice of such delinquency to the Employer, who shall thereafter be required to
withhold any subsequent sums due to the subcontractor for payment of contributions to Metal Lathers Local 46
Fringe Benefit Funds. The Employer only shall be responsible for the payment of such delinquent
contributions to the Metal Lathers Local 46 Fringe Benefit Funds due from the sub-contractor for all periods
subsequent to the receipt by the Employer of such written notice and until the Metal Lathers Local 46 Fringe
Benefit Funds notify the Employer in writing that all delinquencies, including any interest, liquidated
damages, costs and fees due under this Agreement, have been paid. If the notice of sub-contractor delinquency
also specifies nonpayment of wages and working dues check-off, the Employer shall also withhold further
payment to the sub-contractor until those delinquencies, too, have been paid.
Page 18
ARTICLE XIV
VALIDITY
If the Court shall decide any part of this Agreement is illegal, it shall not invalidate other portions; it being the sole
intent and purpose of this Agreement to promote peace and harmony in the craft along lawful lines. Any provisions in
this Agreement, which provides for Union security or employment in a manner and to an extent prohibited by any law
or determination of any Board of Government Agency shall be and hereby is declared to be of no force during the term
of such prohibition. In the event that there shall be any change in applicable laws as to Union Security, the parties
shall re-negotiate any provisions concerning Union Security.
ARTICLE XV
APPLICABILITY
The Employer will provide the Union with a list of its members who have designated it as a Bargaining Agent and who
have agreed to be bound by the terms and conditions of this Collective Bargaining Agreement. In addition, the
Employer will notify the Union of any changes in membership either by the addition of new members or of the
dropping of the members during the period of this Agreement. It is further agreed that all members of the Employer
Association are bound by this Collective Bargaining Agreement, entitled to its benefits, and subject to its obligations
until the termination date, or any subsequent date for three (3) years periods thereafter, whether or not they retain their
membership in the Employer Association for the full period of this Agreement.
ARTICLE XVI
DUES CHECKOFF
It is agreed that the Union shall institute a dues checkoff or Union Fund checkoff, such as Local 46 PAC, Union
Security and Union Dues, from wages as set forth herein after thirty (30) days notice to the Association. Said dues
checkoff shall provide for employee authorizations and shall be in conformity with all applicable laws.
ARTICLE XVII
ALCOHOLIC BEVERAGES
Drugs or alcoholic beverages shall not be permitted on the job during working hours.
ARTICLE XVIII
PICKET LINE CLAUSE
It shall not be a violation of this Agreement and it shall not be cause for discharge or discipline, if employees covered
by this Agreement refuse to cross a primary picket line of labor organization affiliated with the Building and
Page 19
Construction Trades Council of New York or any other Building and Construction Trades Council, provided that any
such picket line is sanctioned by the appropriate Building Trades Council.
ARTICLE XIX
COVERAGE OF LATHING WORK
It is agreed that if any Employer contracts for or performs lathing work falling within the jurisdiction of the Union, as
such jurisdiction is set forth in the Union’s Collective Bargaining Agreement with the Employing Metallic Furring and
Lathing Contractors Association of New York, the Employer agrees that it will assign such work to Employees
represented by the Union and further, the Employer agrees that all the terms of this Collective Bargaining Agreement
shall be applicable to the performance of such work. The Employer must not subcontract bargaining unit work, unless
the subcontractor receiving the subcontract, is bound and obligated under this Agreement. In the event that the sub¬
contractor, or a subcontractor of that subcontractor, fails to make contributions to Local 46 Welfare, Pension, Annuity,
Apprenticeship, Vacation, LMCT, New York Concrete Construction Institute CLIAAPF, NYCPI and BTEAPF Funds
or working assessments, as required by this Agreement, and if the Union, by an officer in written notice, notifies the
subcontracting Employer or Employers that the subcontractor is not complying, the Employer shall be responsible for
such non-compliance for the period beginning two (2) working days after the day of receipt of such notice.
ARTICLE XX
AREA PRACTICE
The Employer agrees that all area practices followed and observed in the Union’s jurisdiction by contractors having
Collective Bargaining Agreements with the Union shall be followed and observed on all job sites of the Employer on
which Journeymen Lathers represented by the Union are employed.
LOCAL 46 WORK RULES ADDENDUM
(1) A minimum of three (3) men on the cutting and bending machine
(2) On beams and columns all number six (6) bars or over will be tied with #14 gauge wire or #16 gauge wire
doubled.
(3) Ail decks will be marked and subsequent decks remarked.
(4) All mats on horses will be tied securely.
(5) Slab chairs will be placed 4’0” on center and high chairs 3’0” on center, except where plans indicate
otherwise.
(6) There will be no broken time (lay-off is pay-off).
Page 20
(7) The Lather will fabricate his own wall spreaders and place them 4’0” on center and 1’0” from top and
bottom. If the footing dowels are utilized, the bottom spreaders may be eliminated.
(8) All columns will be centered in form.
(9) All bars on walls #8 and over will tied with double wire or #14 gauge wire; the setup will be saddled, there
will be no snap tying on walls. Walls shall be tied solid when spacing in 10” or over.
(10) Slabs shall be tied solid when bars are 10” or over on center.
(11) Foremen and contractor will check with the Business Agent at the start of a job in reference to the Shop
Steward, Tag Writer and other positions in accordance w ith Section 21 of the Local Union Constitution.
(12) Only Local 46 Lathers shall be involved when placing fabricated work
(13) When placing bars, individual columns, beams or any other fabricated product by crane, the hooking up,
signaling and placing of same shall be performed by Local 46 Lathers.
(14) No Lather shall work more than one (1) job per day without permission of the Business Agent.
(15) Bar spaces on spiral columns shall be placed by a Local 46 member on the job site.
UNION The Building Contractors Association
Robert A. Ledwith
Business Manager, Financial Secretary/Treasurer
Print Name: s/ 1
Title:
| Address: Phone No.: 3-/J- ~ Cell Phone No.: /^9 – FAX No.: M- |
( /77″ i |
| <4.3/6 ^^/6^ |
|
| E-Mail Address:^0^/4^73^ | L‘ |
Date:
MEMORANDUM OF UNDERSTANDING
Between
Local 46 Metallic Lathers and Reinforcing Iron Workers Union
And
The Building Contractors Association
Dated: JQpr
1) This Contract begins July1, 2012 and ends June 30, 2016.
2) The workday shall be seven [7] or eight (8) hours which shall be determined at
the start of the job. The employer shall notify the Union accordingly. An
employer may start the workday at 7:00 a.m. or 8:00 a.m.
3) This Memorandum shall continue the existing Collective Bargaining Agreement
in full force and effect except as noted below
4) In addition to the per hour wage rate, the Employer shall contribute three
quarters of one percent (3/4 of 1%) of the applicable hourly Journeyman wage
rate for each hour worked to Ironworkers Management Progressive Action
Trust (IMPACT), a jointly trusted Cooperative Trust with federal tax exempt
status under Section 501(a) of the Internal Revenue Code. Tax-exempt status
determination was rendered under the initial name of the Trust which was the
Employers Responsive Educational Cooperation Trust of North America. The
general purposes of the Trust include the improvement and development of the
union ironworking industry through Education, Training, Communication,
Cooperation and government lobbying and legislative initiatives.
5) Effective July1, 2012 the Journeyman base wage shall be subject to $79.81per
hour subject to the allocation by the Local 46 membership. In keeping with this
agreement, Foreman shall receive an additional base wage amount of $3.00 per
hour.
6) The parties agree to follow and be bound by the New York Plan for the
Settlement of Jurisdictional Disputes, until such time, if any, as the BCA is no
longer bound to it by virtue of its membership in the BTEA. BCA members who
choose not to sign this memorandum shall be bound to all provisions of the
existing agreement between Metallic Lathers Union Local 46 and the BCA which
terminates in 2014.
7) The rates included in this Memorandum of Agreement shall take precedent over
all existing rates established. This includes, but not limited to, all Project Labor
Agreements that exists within the jurisdiction covered in this agreement.
Journeyman and Apprentice wages and benefits shall be as follows:
| Effective July 1, 2013 Effective July 1, 2014 Effective July 1, 2015 |
$2.00 per hour to be allocated by the Local 46 membership $2.00 per hour to be allocated by the Local 46 membership $2.00 per hour to be allocated by the Local 46 membership |
Journeyman Wage Rate
| Base Wage | $40.00 |
| Vacation Dues, Union Security, Local 46 Federal & State PAC Hourly Taxable Wage Foreman makes $52.73 per hour taxable |
$ 8.50 $ 1.23 $49.73 |
Trust Fund Contributions for Journeyman Benefit Check to be
sent to the jobsite with payroll and the appropriate Trust Fund Forms
| Trust Fund | $ 9.16 |
| Dental Fund | .50 |
| Pension | $ 9.00 |
| Scholarship | .10 |
| Ironworkers Impact | .20 |
| Apprentice Fund | $ .50 |
| Promotional Fund | .03 |
| Advancement Fund | .20 |
| Labor Management Cooperative Trust | .38 |
| Substance Abuse Program | .01 |
| Total Fringe Benefits | $20.08 |
| Annuity | $10.00 |
| Vacation Dues, Union Security, Local 46 Federal & State PAC Total Benefit Package Entire Package: $79.81 |
$ 8.50 $ 1.23 $39.81 |
Overtime shall be at Time and a half. After 10 hours worked in one shift, those extra hours
shall be double time. Sundays & Holidays are at double time for all hours workedApprentice wage on a separate sheet.
2
Apprentice Wage Rates
| 1st YEAR $17.71 0.00 $17.71 |
2nd YEAR $22.05 .66 $22.71 |
3rd YEAR $26.48 1.23 $27.71 |
BASE WAGE DUES etc. TOTAL TAXABLE |
Trust Fund contributions with the appropriate paperwork shall accompany the
payroll to the jobsite on payday.
$ 9.00
$ 9.16
.50
$ .50
.20
.20
.38
.03
.10
.01
$20.08
PENSION
TRUST FUND
DENTAL FUND
APPRENTICESHIP FUND
IRON WORKERS IMPACT
ADVANCEMENT FUND
LABOR MANAGEMENT COOPERATIVE TRUST
PROMOTIONAL FUND
SCHOLARSHIP FUND
SUBSTANCE ABUSE PROGRAM
FRINGE PACKAGE
TOTAL PACKAGE PER HOUR
| Ist YEAR $20.08 |
2ND YEAR $20.08 |
3rd YEAR $20.08 |
FRINGE PACKAGE |
| ANNUITY UNION DUES, UNION SECURITY, LOCAL 46 PAC TOTAL PER HOUR |
0.00 $20.08 |
.66 $20.74 |
1.23 $21.31 |
Overtime shall be at time and a half (l-y2). After 10 hours worked in one shift, those extra
hours shall be at double time. Sunday and Holidays are at double time for all hours
worked.
3
Apprentice Wage Rates prior to June 29, 2011
| lsl YEAR $26.68 152 $28.20 |
2ND YEAR $31.28 152 $32.80 |
3ld YEAR $36.34 1-52 $37.86 |
BASE WAGE DUES etc. TOTAL TAXABLE |
Trust Fund contributions with the appropriate paperwork shall accompany the
payroll to the jobsite on payday.
$ 9.00 PENSION
$ 9.16 TRUST FUND
| .50 DENTAL FUND $ .50 APPRENTICESHIP FUND .20 IRON WORKERS IMPACT .20 ADVANCEMENT FUND .38 LABOR MANAGEMENT COOPERATIVE TRUST .03 PROMOTIONAL FUND |
Subject t0 future •• reVlSlOn |
.10 SCHOLARSHIP FUND
.01 SUBSTANCE ABUSE PROGRAM
$20.08 FRINGE PACKAGE
TOTAL FRINGE AND BENEFIT PACKAGE PER HOUR
| 1st YEAR $20.08 2.94 |
2ND YEAR $20.08 4.59 |
3rd YEAR $20.08 5.74 |
FRINGE PACKAGE ANNUITY UNION DUES, UNION SECURITY, LOCAL 46 PAC TOTAL PER HOUR |
| 173 $24.25 |
123 $25.90 |
1,23 $27.05 |
Overtime shall be at time and a half (l-%). After 10 hours worked in one shift, those extra
hours shall be at double time. Sunday and Holidays are at double time for all hours
worked.
THE BUILDING CONTRACTORS
L x/ .6
Print Name
METALLIC LATHERS UNION
LOCAL 46
4
Signature
Print Name